Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FLUORESCENT TRACING IN PROCESS CONTROL
#1

Inhibitor chemicals are added to prevent scaling and fouling in heat exchangers, condensers and boilers. Controlling the concentration of inhibitor chemicals is essential in controlling the chemical costs maximizing the efficiency of the process. Flourescent tracing is a simple concentration measurement technique that can be used in concentration control. This seminars looks into the various conventional methods by which the inhibitor chemical concentration is maintained and the application of fluorescent to the same. Controlling water treatment chemical costs and maximizing the efficiency of the process in which they are involved, is a central theme in today?s manufacturing environment. When chemicals are used in integrated process fluid and cooling / boiling water systems, correct dosage is not only critical to the Company?s bottom line, but also essential in maintaining the integrity of the systems they are designed to benefit. Fluorescent tracing technology is found to be effective in controlling the cost and the quality in such systems.
Reply
#2
i need the function & iagrams of the subject posted above
Reply
#3
Fluorescent tracing is based on a simple measurement concept. Inert chemical tracers are mixed, at a known specified level, with the water treatment chemicals. The tracer material is used at a low concentration in the sys- tem, generally in the range of parts per million down to parts per trillion. Remaining inert, the tracer does not react with any of the other chemicals in the water and does not change the treatment program’s activity. A sidestream of recirculating cooling water is then piped through a flow cell containing a microprocessor- based fluorometer. Light of a specific wavelength passes through a flow cell, exciting the tracer com- pound and allowing its emissions to be read by a de- tector. The resultant signal is sent to the microproces- sor, which determines the concentration of the tracer, with dosages that can range down to a few parts per billion to parts per trillion, depending on the tracer compounds used. Since the ratio of the tracer to chem- ical inhibitor is known, this provides a measure of in- hibitor concentration in the system.


reference:
http://aicheuploadedFiles/CEP/Issues/040266.pdf
http://distrilabparticlesfilters/pdf/Bul120'A'%20FluorPoly.pdf
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Tagged Pages: flourescent tracing in process control, flourosent tracing in process control,
Popular Searches: niosh cep, process barron, code for digital image tracing by sequential multiple watermarking, fluorescent bulb disposal**single phase inductionmotor, ppt for automaticshatter tracing using, matlab code for contour tracing face detection, nicotine sulphate process,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  MODERN AIR POLLUTION CONTROL TECHNOLOGIES seminar projects crazy 2 7,433 02-02-2013, 07:15 PM
Last Post: Guest
  Statistical Process Control Lab smart paper boy 0 1,429 10-08-2011, 03:44 PM
Last Post: smart paper boy
  BIO-OXIDATION - A TECHNOLOGY FOR SUSTAINABLE AIR POLLUTION CONTROL seminar projects crazy 2 4,885 02-08-2010, 07:24 PM
Last Post: nitinjakkulwar
  NOISE POLLUTION AND CONTROL IN CHEMICAL INDUSTRY seminar projects crazy 0 5,388 31-01-2009, 12:30 AM
Last Post: seminar projects crazy